Jump to the main content block
Department of Industrial Engineering and Engineering Management
  1. Home
  2. Publications

Publications (Professor James T. Lin)

Go back to previous page
  

 

A.期刊論文(REFERRED PAPER)

  1.  Chih-Wei Huang, James. T. Lin*, 2016 “A pre-dispatching vehicle method for a diffusion area in a 300 mm wafer fab”, Journal of Industrial and Production Engineering, Vol.33, No.8, pp.579-591.
  2. Bang-Ning Hwang*, Tsai-Ti Chen, James T. Lin, 2016 “3PL Selection Criteria in Integrated Circuit Manufacturing Industry in Taiwan”, Supply Chain Management: an International Journal, Vol. 21, Iss 1, pp. 103 – 124.
  3. James. T. Lin*, Chun-Chih Chiu, 2016 “A Hybrid Particle Swarm Optimization with Local Search for Stochastic Resource Allocation Problem”, Journal of Intelligent Manufacturing (Published on-line).
  4. James. T. Lin*, Chien-Ming Chen, 2015 “Simulation optimization approach for hybrid flow shop scheduling problem in semiconductor back-end manufacturing”, Simulation Modelling Practice and Theory, Vol.51, pp.100-114.
  5. James T. Lin*, Chao-Jung Huang, 2014 “A simulation-based optimization approach for a semiconductor photobay with automated material handling system”, Simulation Modelling Practice and Theory, Vol.46, pp.76-100.
  6. James T. Lin, F. K. Wang* and C. Wu, 2014 , A comparison study of replenishment strategies in vendor-managed inventory, Arabian Journal for Science and Engineering, 39(6), 5253-5246.
  7. James T. Lin, Tzu-Li Chen*, Hsiao-Ching Chu, 2014 “A Stochastic Dynamic Programming Approach for Multi-Site Capacity Planning in TFT-LCD Manufacturing under Demand Uncertainty”, International Journal of Production Economics, Vol.148, pp.21-36. 
  8. Tzu-Li Chen, James T. Lin, and Cheng-Hung Wu, 2014 “Coordinated Capacity Planning in Two-stage Thin-Film-Transistor Liquid-Crystal-Display (TFT-LCD) Production Networks”, Omega, Vol. 42, issue 1, pp. 141 – 156
  9. James T. Lin, Chien-Ming Chen, Chun-Chih Chiu and Hsin-Ying Fang, 2013 “Simulation Optomization with PSO and OCBA for Semiconductor Back-end Assembly”, accepted by Journal of Industrial and Production Engineering
  10. James T. Lin, Fu- Kwun Wang, and Candice Wu, 2013 “A comparison study of replenishment strategies in vendor managed inventory”, accepted by The Arabian Journal for Science and Engineering (AJSE)
  11. James T. Lin, Cheng-Hung Wu, and Chih-Wei Huang, 2013 “Dynamic vehicle allocation control for automated material handling system in semiconductor manufacturing”, Computers & Operations Research, Vol.40, issue 10, pp.2329-2339
  12. Chao-Jung Huang, Kuo-Hao Chang, and James T. Lin, 2012 "Optimal Vehicle Allocation for Automated Materials Handling System Using Simulation Optimization", International Journal of Production Research,  Vol. 50, issue 20, pp.5734-5746.
  13. Cheng-Hung Wu, James T. Lin, and Wen-Chi Chien, 2012 “Dynamic Production Control in Parallel Processing Systems under Process Queue Time Constrains”, Computers & Industrial Engineering, Vol.63, issue 1, pp. 192-203
  14. Hua-Hsuan Wu, Cheng-Hung Wu, James T. Lin, 2011 “Dynamic Selling of Quality-Graded Products under Demand Uncertainty”, Computers & Industrial Engineering, Vol.61, issue 1, pp.141-149.
  15. Yin-Yann Chen, James T. Lin, Tzu-Li Chen, 2011 “A Two-phase Dynamic Dispatching Approach to Semiconductor Wafer Testing”, Robotics and Computer-Integrated Manufacturing, Vol.27, pp.889-901.
  16. Ming-Jong Yao, James T. Lin and Chen-Hao Yang, 2011 “An Integrated Approach for the Operations of Distribution and Lateral Transshipment for Seasonal Products – A Case Study in Household Product Industry”, Journal of Industrial and Management Optimization, Vol.7, No.2, pp.401-424.
  17. James T. Lin, Cheng-Hung Wu, Tzu-Li Chen, and Shin-Hui Shih, 2011 “A Stochastic Programming Model for Strategic Capacity Planning in Thin Film Transistor – Liquid Crystal Display (TFT-LCD) Industry” , Computers & Operations Research, Vol. 38, issue 7, pp. 992 - 1007
  18. Cheng-Hung Wu, James T. Lin, and Hua-Hsuan Wu, 2010 “Robust Production and Transportation Planning in TFT-LCD Industry under Demand and Price Uncertainties”, International Journal of Production Research, Vol. 48, Issue 20, pp 6037 - 6060
  19. James T. Lin, I-Hsuan Hong,, Cheng-Hung Wu, Kai-Sheng Wang, 2010 “A Model for Batch Available-to-Promise in Order Fulfillment Processes for TFT-LCD Production Chains”, Computers and Industrial Engineering, Vol 59, issue 4, pp. 720 - 729
  20. Tzu-Li Chen, James T. Lin and Shu-Cherng Fang, 2010 “A Shadow-Price Based Heuristic for Capacity Planning of TFT-LCD Manufacturing”, Journal of Industrial and Management Optimization, Vol.6, No.1, pp.209-239.
  21. Cheng-Hung Wu, James T. Lin and Wen-Chi Chien, 2010 “Dynamic Production Control in a Serial Line with Process Queue Time Constraint”, International Journal of Production Research, Vol.48, Issue 13, pp.3823-3843.
  22. Sonia M. Lo, Yin-Yann Chen and James T. Lin, 2009 “One Stop Service: The Case of Senao International Co., Ltd.”, International Journal of Electronic Business Management, Vol.7, No.4, pp.225-239.
  23. James T. Lin, Tzu-Li Chen, Yen-Ting Lin, 2009“Critical material planning for TFT-LCD production industry”, Int. J. Production Economics, Vol.122, No.2, pp.639-655.
  24. Yin-Yann Chen, and James T. Lin, 2009 “A modified particle swarm optimization for production planning problems in the TFT Array process”, Expert Systems With Applications, Vol.36, pp.12264-12271.
  25. Juin-Han Chen, James T. Lin, and Yi-Sheng Wu, 2008, “Order Promising Rolling Planning with ATO/CTP Reallocation Mechanism”, Industrial Engineering & Management Systems, Vol.7, No.1, pp.57-65.
  26. James T. Lin, F. K. Wang and C. C. Peng, 2008 “Lot release times and dispatching rule for a TFT-LCD cell process”, Robotics and Computer-Integrated Manufacturing, Vol.24, No.2, pp.228-238.
  27. D.Y. Sha, James T. Lin, and C.J. Yang, 2008, “The evaluation of search range assignment in 300 mm automated material handling system”, International Journal of Advanced Manufacturing Technology, Vol 35, No.7-8 pp.697-710
  28. Shin-Lian Lo, Fu-Kwun Wang and James T. Lin, 2008 “Forecasting for the LCD Monitor Market”, Journal of Forecasting, Vol.27, No.4, pp.341-356

 

B. 研討會論文(CONFERENCE PAPER)

  1. James T. Lin, Wu-Der Jeng, Chang-Yin Wang, Yuan-Hsin Hsieh，2016，”Heuristics for solving the containerized traffic problem with multi-dispatching center”，7th POMS-HK International Conference，Hong Kong Polytechnic University and the University of Macau.
  2. James T. Lin, Chun-Chih Chiu, Ying Xie，2015，”A Hybrid Genetic Algorithm for Resource Allocation Problem with Uncertainty”，The 16th Asia Pacific Industrial Engineering and Management Systems Conference，Ho Chi Minh City, Vietnam
  3. 林則孟、葛玉祥、邱俊智、黃辰皓，2015，〈考量訂單分配問題於船舶途程規劃問題之探討〉，2015中國工業工程學會年會論文，台中，勤益科大。
  4. 林則孟、邱俊智、張嘉軒、謝熒，2015，〈考慮批量分割於三站別混合流程型生產排程問題〉，2015中國工業工程學會年會論文，台中，勤益科大。
  5. 林則孟、邱俊智、鍾雅琳、蔡宜璇，2015，〈考量批量流於半導體封裝廠之生產排程問題〉，2015中國工業工程學會年會論文，台中，勤益科大。
  6. 林則孟、鍾唯兌、邱俊智、張裕昇，2015，〈模擬最佳化於機場行李搬運系統暫存區存放設定問題〉，2015中國工業工程學會年會論文，台中，勤益科大。
  7. James T. Lin, Chun-Chih Chiu, Yu-Hsiang Chang, Hung-Ming Chen，"A Hybrid Genetic Algorithm for Simultaneous Scheduling of Machines and AGVs in FMS"，2nd International Conference on Industrial Engineering, Management Science and Applications, May 2015，Japan, Tokyo
  8. James T. Lin, Irene Liou, Chun-Chih Chiu，"A Simulation-based for Inter Release Problem in Airport Baggage Handling Systems"，2nd International Conference on Industrial Engineering, Management Science and Applications, May 2015，Japan, Tokyo
  9. James T. Lin, Chien-Ming Chen，2015 ”Simulation optimization with GA and OCBA for semiconductor back-end assembly scheduling”, 5th International Conference on Industrial Engineering and Operations Management, Dubai.
  10. James T. Lin, Edward Huang, Ping-Hsi Shih, Chun-Chih Chiu，2015 “Airport Baggage Handling System Simulation Modeling Using SysML”, 5th International Conference on Industrial Engineering and Operations Management, Dubai.
  11. James T. Lin, Chun-Chih Chiu，2014 “A PSO-based Hybrid Approach for Buffer Allocation Problem with Uncertainty”, 2014 APIEMS, Jeju island, South Korea.
  12. 林則孟、劉堰丞、邱俊智、鍾唯兌，2014，〈機場行李搬運系統模式構建與分析〉，2014中國工業工程學會年會論文，台北，明志科大。（會議論文競賽優勝）
  13. 林則孟、邱俊智、陳宏銘，2014，〈粒子群演算法結合模擬於隨機衝區容量分配問題〉，2014中國工業工程學會年會論文，台北，明志科大。（會議論文競賽優勝）
  14. 林則孟、翁毓夆、邱俊智、葛玉祥，2014，〈結合訂單分配與船規劃問題之探討〉，2014中國工業工程學會年會論文，台北，明志科大。
  15. 林則孟、黃謙研、陳建銘、邱俊智、鍾雅琳，2014，〈模擬於批量與集批加工之混合流程型生產排程〉，2014中國工業工程學會年會論文，台北，明志科大。（會議論文競賽優勝）
  16. 黃昭蓉、林則孟，2014，〈結合啟發式演算與模擬於自動化物料系統之車數配置問題〉，2014中國工業工程學會年會論文，台北, 明志科大
  17. James T. Lin and Chun-Chih Chiu，2013, “A Hybrid Search Algorithm with Optimal Computing Budget Allocation for Resource Allocation Problem”, 2013WSC, Washington DC, U.S.A
  18. 林則孟、張祐翔、黃昭蓉、許雅寧，2013, 〈彈性製造系統之機台與無運車同步排程之模擬分析〉，2013中國工業工程學會年會論文, 屏東科技大學
  19. James T. Lin, Chien-Ming Chen, Chun-Chih Chiu and Hsin-Ying Fang，2013 ”A simulation with PSO approach for semiconductor back-end assembly”, 2013 IIE Asian, Taipei, Taiwan.
  20. James T. Lin and Chao-Jung Huang，2013, “Simulation Optimization Based Hybrid PSO Application of Optimal Vehicle Allocation Problem in Automated Materials Handling System”, 26th European Conference on Operation Research (EURO-INFORMS), Rome -Università Sapienza, Italy
  21. 林則孟、黃昭蓉、田孝貞，2012〈隨機模擬最佳化在自動化物料搬運系統之應用〉，2012中國工業工程學會年會論文，大葉大學（會議論文競賽優勝）
  22. 林則孟、古薇涵  邱俊智，2012〈多廠區訂單分配與船舶路徑規劃問題及演算法〉，2012中國工業工程學會年會論文，大葉大學（會議論文競賽優勝）
  23. 林則孟、陳子立、卓佳儀，2012〈即時近似動態規劃應用於TFT-LCD隨機產能規劃〉，2012中國工業工程學會年會論文，大葉大學
  24. James T. Lin, C. C. Chiu and C. J. Huang，2012 “Simulation Optimization Based Hybrid PSO Application of Resources Allocation Problem in Manufacturing Line”, International Conference on Innovation and Management, Republic of Palau.
  25. 林則孟、陳子立、吳蘇容，2011 〈模擬為基之近似動態規劃應用在TFT-LCD隨機產能規劃問題〉，一百年度中國工業工程學會年會論文，明新科技大學
  26. 林則孟、陳思妤，2011 〈供應商管理存貨模式下之預測補貨策略因子分析〉，一百年度中國工業工程學會年會論文，明新科技大學
  27. 陳建銘、林則孟，2011 〈半導體後段製造業之產能規劃模式〉，一百年度中國工業工程學會年會論文，明新科技大學
  28. James T. Lin, and Chao-Jung Huang，2011 “Simulation-based Optimization for an Automated Material Handling System Dispatching Problem”, International Conference on Innovation and Management, Kuala Lumpur, Malaysia
  29. James T. Lin, Kuo-Hao Chang, and Chao-Jung Huang，2010 ”Dynamic Vehicle Allocation in Automated Material Handling System”, International Conference on Industrial Engineering and Engineering Management (IE&EM), Xiamen, China
  30. James T. Lin, Tzu-Li Chen, Yin-Yann Chen，2010 ”Medium-term Multi-plant Capacity Planning Problems for Semiconductor Foundry”, International Conference on Industrial Engineering and Engineering Management (IE&EM), Xiamen, China
  31. 林則孟、黃昭蓉、黃晧，2010 〈晶圓廠自動化物料搬運系統之動態車輛配置問題〉，九十九年度中國工業工程學會年會論文，南台科技大學
  32. 林則孟、王常殷、王馨儀，2010 〈以啟發式演算法求解多派車中心之整櫃式貨櫃運輸問題〉，九十九年度中國工業工程學會年會論文，南台科技大學
  33. 林則孟* 黃昭蓉 劉秋君，2010 〈整合式離散式事件模擬構建與模擬分析〉，仿真科学与技术学术研讨会，福州市，中國福建
  34. James T. Lin, Tzu-Li Chen, 2010 “A Hierarchical Planning in TFT‐LCD Industry: Framework and Review”, International Conference on Innovation and Management, Penang, Malaysia
  35. James T. Lin, Tzu-Li Chen, Hsiao-Ching Chu, Chung-Han Yang, 2009 “A Capacity Planning Model for TFT-LCD Production Networks”, International Conference on Industrial Engineering and Engineering Management (IE&EM), Beijing, China
  36. James T. Lin, Tzu-Li Chen, and Hsiao-Ching Chu, 2008 “Capacity Allocation and Expansion for Multi-Generation & Multi-Site TFT-LCD Manufacturing”, International Conference of Production and Operation Management, Xiamen, China

 

C. 專書(Publications)

  1. 林則孟《生產計畫與管理》，華泰文化，第二版，2012.9
  2. 林則孟《系統模擬理論與應用》，滄海書局，2001.7
  3. Lin, James T. and C.C.K. Chang 1994 “Approaches to analysing the load routing problem in tandem AGV systems”, in Material Flow Systems in Manufacturing, J.M.A. Tanchoco, Ed., Chapman & Hall

 

Click here to download all the publications (before 2008).

TOP

 

Click Num:
Login Success