Jump to the main content block
Department of Industrial Engineering and Engineering Management
  1. Home
  2. Publications

Publications (Professor Mao-Jiun J. Wang)

Go back to previous page
  

 

A. Publications：Journal Papers

  1. Y. C. Lee, and M. J. Wang*, "Taiwanese adult foot shape classification using 3D scanning data", Ergonomics, (2015). [SCI] (In press)

  2. Y. C. Lee, G. Lin, and M. J. Wang*, "Comparing 3D foot scanning with conventional measurement methods", Journal of Foot and Ankle Research, (2015). [SCI] (In press)

  3. J. P. Chen, M. J. Chung, C. Y. Wu, K. W. Cheng, and M. J. Wang, “A comparison of barefoot walking and shoe walking between children with and without flatfeet”, Journal of American Podiatric Medical Association, (2014). [SCI] (Accepted)

  4. T. H. Chen, C.F. Fan, and M. J. Wang, “The effects of cleanroom noise intensity and frequency on physiological measures and subjective responses”, Work: A Journal of Prevention, Assessment and Rehabilitation, (2014). [SSCI] (Accepted)

  5. T. H. Chen, W. P. Chen, M. J. Wang, "The effect of air permeability and water vapor permeability of clean room clothing on physiological responses and wear comfort", Journal of Occupational and Environmental Hygiene, 11, 6, 366-376, (2014), [SCI]

  6. T. H. Chen, C. L. Lin, and M. J. Wang, “The evaluation of double-layer clothing in semiconductor manufacturing environment”, International Journal of Human Factors and Ergonomics in Manufacturing and Service Industries, 24(2), 207-215, (2014). [SCI] 

  7. C. L. Lin, L. J. Tu, and M. J. Wang, "Improving SEM inspection performance in semiconductor manufacturing industry", International Journal of Human Factors and Ergonomics in Manufacturing and Service Industries, 24(1), 124-129, (2014). [SCI] 

  8. B. W. Hsu and M. J. Wang, “Evaluating the effectiveness of using electroencephalogram power indices to measure visual fatigue”, Perceptual and Motor Skills, 116 (1), 235-252, (2013). [SSCI]

  9. C. F. Kuo, M. J. Wang, “Motion Generation and Virtual Simulation in a Digital Environment”, International Journal of Production Research, (2012). [SCI] (in press) 

  10. T. H. Chen, C. L. Lin, and M. J. Wang, “The evaluation of double-layer clothing in semiconductor manufacturing environment”, International Journal of Human Factors and Ergonomics in Manufacturing and Service Industries, (2012). [SCI] (in press)

  11. B. W. Hsu and M. J. Wang, “Evaluating the effectiveness of using electroencephalogram power indices to measure visual fatigue”, Perceptual and Motor Skills, (2012). [SSCI] (accepted)

  12. C. L. Lin, L. J. Tu, and M. J. Wang, "Improving SEM inspection performance in semiconductor manufacturing industry", International Journal of Human Factors and Ergonomics in Manufacturing and Service Industries. 2012, [SCI] (in press)

  13. Y. C. Lee, G. Lin, M. J. Wang, “Evaluating insole design with joint motion, plantar pressure and rating of perceived exertion measures”, Work: A Journal of Prevention, Assessment and Rehabilitation, 41, 1114-1117, 2012 [SSCI].

  14. Y. L. Lin, M. J. Wang, Y. Y. Tsai, and J. Huang, “Feature extraction from depth camera”, Advanced Science Letters, 9, 429-434, 2012, [SCI]

  15. M. W. Riley, Y. T. Hung, M. J. Wang, Y. L. Lin, J. C. Blunk, "Interactions between task repetition and psychosocial factors", Work: A Journal of Prevention, Assessment and Rehabilitation, 41, 2392-2397, 2012 [SSCI].

  16. Y. L. Lin, and M. J. Wang, “Constructing 3D human model from front and side images”, Expert System with Applications, 39, 5012-5018, 2012 [SCI]

  17. M. J. Chung, and M. J. Wang, “Gender and walking speed effects on plantar pressure distribution for adults aged 20-60 years”, Ergonomics, Vol. 55, No 2, 194-200, 2012

  18. Y. L. Lin, M. J. Wang, Y. Y. Tsai, and J. Huang, “Feature extraction from depth camera”, Advanced Science Letters, 2011, [SCI] (accepted)

  19. T. H. Chen, C. L. Lin, and M. J. Wang, “The evaluation of double-layer clothing in semiconductor manufacturing environment”, International Journal of Human Factors and Ergonomics in Manufacturing and Service Industries. 2011, [SCI] (accepted)

  20. C. L. Lin, L. J. Tu, and M. J. Wang, "Improving SEM inspection performance in semiconductor manufacturing industry", International Journal of Human Factors and Ergonomics in Manufacturing and Service Industries. 2011, [SCI] (accepted)

  21. M. J. Chung, and M. J. Wang, “Gender and walking speed effects on plantar pressure distribution for adults aged 20-60 years”, Ergonomics, 2011 [SCI] (accepted)

  22. Y. L. Lin, and M. J. Wang, “Automated body feature extraction from 2D images”, Expert System with Applications, 38, 2585-2591, 2011 [SCI]

  23. M. J. Chung, and M. J. Wang, “The change of gait parameters during walking at different percentage of preferred walking speed for healthy adults aged 20-60 years”, Gait and Posture, 31, 131-135, 2010 [SCI]

  24. J. M. Lu, M. J. Wang, “The evaluation of scan-derived anthropometric measurements”, IEEE Transactions on Instrumentation & Measurement, Vol. 59, No 8, 2048-2054, 2010 [SCI]

  25. S. W. Chang, M. J. Wang, and N. J. Delleman, “Approach strategy and working posture in manual hand tool operation”, Human Movement Science, 29, 228-242, 2010 [SCI]

  26. C. L. Lin, M. J. Wang and C. G. Drury, “Evaluation of perceived discomfort in repetitive arm reaching and holding tasks”, International Journal of Industrial Ergonomics, 40, 90-96, 2010 [SCI]

  27. J. M. Lu, M. J. Wang and R. Mollard, “The effect of arm posture on the scan-derived measurements”, Applied Ergonomics, 41, 236-241, (2010) [SCI]

  28. J. M. Lu, and M. J. Wang, “The development of an intelligent system for customized clothing making”, Expert Systems with Applications, 37, 799-803, (2010) [SCI].

  29. C. L. Lin, M. S. Chen, Y. L. Wei, and M. J. Wang, "The evaluation of force exertions and muscle activities when operating a manual guided vehicle", Applied Ergonomics, 41, 313-318 (2010) [SCI]

  30. C. F. Kuo, and M. J. Wang, “Motion generation from MTM semantics”, Computers in Industry, 60, 339-348, (2009) [SCI].

  31. Y. Y. Kang, M. J. Wang, and R. T. Lin, “Usability evaluation of e-books”, Displays, 30 (2), 49-52, (2009) [SCI].

  32. J. P. Chen, M. J. Chung, and M. J. Wang, “Flatfoot prevalence and foot dimensions of the 5 to 13 year old”, Foot and Ankle International, 30 (4), 326-334, (2009) [SCI].

  33. M. J. Chung, and M. J. Wang, “The effect of age and gender on joint range of motion of worker population in Taiwan”, International Journal of Industrial Ergonomics, 39, 596-600, (2009) [SCI].

B. Publications：Book Chapters

  1. Y. L. Lin, M. J. Wang, and B. Wang, “Body dimension measurement using a depth camera”, In Yamamoto S. (ed.), New Ergonomics Perspective, CRC Press (Taylor & Francis Group), 2015.

  2. C. Y. Wu, and M. J. Wang, “A scoliosis survey in children with overweight at age 6 to 13 year old”. In Shih, Y. C. and Liang, S. F. (eds.), Bridging Research and Good Practices towards Patient Welfare, CRC Press (Taylor & Francis Group), 2015.

  3. Y. C. Lee, D. C. Chen, M. J. Wang, and S. J. Chen, “Innovative insole design and development”. In C. F. Chien and C. C. Wu (eds.), Industrial Engineering and Management Cases, CIIE, 2014.

  4. C. Y. Wu, H. R. Huang, and M. J. Wang, “The ergonomics evaluation of three front baby carriers”, Advances in Ergonomics in Design, Usability & Special Populations: Part III, 2014.

  5. C. Y. Wu, T. H. Chen, and M.-J. Wang, “Anthropometric and Scoliosis Survey for Children with Physical and Mental Disabilities”. Advances in Human Aspects of Healthcare. V. G. Duffy (ed), CRC Press: 583-591, 2012.

  6. Y. C. Lee, G. Lin and M. J. Wang, “Evaluating arch dimensions differences by using 3-D foot scanning data”, in Shih, Y.C. and Liang, S. F. (eds), Ergonomics in Asia: Development, Opportunities, and Challenges, CRC Press, 223-226, 2011.

  7. B. W. Hsu, and M. J. Wang, “Electroencecephalographic study of visual fatigue”, in Kumashiro M. (ed), Ergonomics Trends from the East, CRC Press (Taylor & Francis Group), 2010.

C. Publications：Conference Papers

  1. Y. C. Lee, M. Kouchi, M. Mochimaru, M. J. Wang, The comparison of Taiwanese and Japanese female foot dimensions”, CIIE, 2014.

  2. C. Y. Wu, H. R. Huang, and M. J. Wang, “Exploring the attractive image factors of baby carriers”, 2014 International Conference on Beyond Kansei Engineering and Design, Tainan, Taiwan, 2014.

  3. M. J. Wang, B. W. Hsu, and C. Y. Chen, “Evaluating mental workload measures in performing multiple task management”, The 15th Asia Pacific Industrial Engineering and Management Systems (APIEMS 2014), Jeju, Korea, 2014.

  4. C. Y. Wu, H. R. Huang, and M. J. Wang, “The ergonomics evaluation of three front baby carriers”, AHFE International 2014.

  5. S. H. Liu, T. H. Chen and M. J. Wang, “The Study Of The Best Shift Work System In  Petro-Chemical Industry”, the 13th Chinese Institute of industrial Engineers Conference (CIIE’13) 2013. 

  6. C. H. Wang, S. C. Chang and M. J. Wang, “Developing an Automobile Maintenance Expert System Using Augmented Reality”, The 14th Asia Pacific Industrial Engineering and Management Systems (APIEMS 2013), Cebu, Philippines, 2013.

  7. C. C. Kuo, T. C. T and M. J. Wang, “Using 3D Scanning to Classify Taiwanese Male Head Shapes”, The 14th Asia Pacific Industrial Engineering and Management Systems (APIEMS 2013), Cebu, Philippines, 2013.

  8. C. Y. Hsiao, Y. J. Liu and M. J. Wang, “Usability Evaluation Of The Touch Screen User Interface Design”, The 15th International Conference on Human-Computer Interaction, Mirage Hotel, Las Vegas, Nevada, USA, 2013.

  9. C. Y. Wu, T. H. Chen, and M. J. Wang, “Anthropometry and scoliosis survey for school children with mental and physical disabilities“, AHFE International 2012.

  10. Y. C. Lee, G. Lin and M. J. Wang, “Evaluating insole design with joint motion, plantar pressure and rating of perceived exertion measures”, The 18th Congress of the International Ergonomics Association, Recife, Brazil, 2012. 

  11. M. W. Riley, Y. T. Hung, M. J. Wang, Y. L. Lin, and J. C. Blunk, “Interactions between task repetition and psychosocial factors”, The 18th Congress of the International Ergonomics Association, Recife, Brazil, 2012.

  12. C. Y. Wu, T. H. Chen, and M. J. Wang, “Anthropometry and scoliosis survey for school children with mental and physical disabilities“, AHFE International 2012.

  13. Y. C. Lee, G. Lin, and M. J. Wang, “Evaluating the Differences among the Four Foot Dimension Measurement Methods”, International Conference on Instrumentation, Measurement, Circuits and Systems (IMCAS '11) 2011.

  14. G. Lin, Y. C. Lee, and M. J. Wang, “Designing arch support using 3D scanning foot data”, Ergonomics Society of Taiwan Annual Conference 2011.

  15. Y. C. Li, and M. J. Wang, “Evaluating the gender effect on foot dimensions”, Proceedings of the 9th Pan-Pacific Conference on Occupational Ergonomics, 2010.

  16. Y. L. Lin, and M. J. Wang, “Constructing 3D human model from 2D images”, Proceedings of the 17th International Conference on Industrial Engineering and Engineering Management, 2010.

  17. T. H. Chen, C. L. Lin and M. J. Wang, “The Evaluation of Double-layers Clothing on Clothing Microclimate, Physiological Responses and Subjective Comfort”, AHFE International 2010.

  18. M. C. Chung, C. H. Chang, C. L. Lin and M. J. Wang, “A Comparison of Different Shoe Insoles in Gait Performance”, AHFE International 2010.

  19. L. J. Twu, C. L. Lin and M. J. Wang, “The Effect of Local Illumination on Light-on Test Inspection in a TFT-LCD Plant”, AHFE International 2010.

  20. C. L. Lin, Y. T. Hung, M. J. Wang and J. P. Chen, “The Investigation of Low Back Problems among Home Delivery Drivers”, AHFE International 2010.

  21. C. Y. Wu, C. L. Lin and M. J. Wang, “The Effect of Backpack Weight on Gait Parameters”, AHFE International 2010.

  22. C. L. Lin, and M. J. Wang, “The effect of display type and video game type on visual fatigue and mental workload”, International Conference on Industrial Engineering and Operation Management 2010.

  23. Y. L. Lin, and M. J. Wang, “3D body shape deformation from front and side images”, APIEMS, 2009.

  24. Y. T. Hung, C. L. Lin, M. J. Wang, and C. P. Chen, “Investigating the low back discomfort problems in home delivery drivers”, CIIE 2009.

  25. H. Strasser, M. J. Wang, M. C. Chiu, O. Mueller, “Physiological Costs and Hearing Risks Associated with Chinese Classical Music and Energy-Equivalent Sound Exposures with Differing Frequency Composition”, IEA 2009.

  26. J. M. Lu, M. J. J. Wang, R. Mollard, P.Y. Hennion, C.L. Lin, “Body shape analysis using 3D scanning data”, IEA 2009.

  27. B. W. Hsu, M. J. J. Wang, “Visual fatigue evaluation of PDP, LCD and CRT TV”, IEA 2009

  28. M. J. Chung, M. J. Wang, “The effects of walking speed and gender on plantar pressure parameters”, IEA 2009.

  29. C. F. Kuo, M. J. Wang, “Motion Generation from Semantics”, IEA 2009.

D. Publications：Patents

  1. M. J. Wang, C. F. Kuo, C. H. Su, and S. C. Chang, Automated operation planning system based on physiological, motion, and environmental information. ROC Patent No.  I403962, 2013. 

  2. M. J. Wang, S. N. Chen, C. F. Kuo, Digital human model motion generation based on object characteristics, ROC Patent No. I395153, 2013.

  3. M. J. Wang, C. L. Lin, and Y. C. Lee, Ergonomics nap pillow design, ROC Patent No. M427029, 2012.

  4. T. A. Kuo, F. J. Kuo, P.C. Chen, M. J. Wang, C. F. Kuo, S. Li, S. W. Chang, Synthetic Image Automatic Generation System and Method Thereof, PR China Patent No. 802067, 2011.

  5. M. J. Wang, C. L. Lin, and Y. C. Lee, Ventilating insole structure, ROC Patent No. M388860, 2010.

  6. M. J. Wang, Y. C. Lee, and Gloria Lin, Arch support insole, ROC Patent No. M391862, 2010.

  7. M. J. Wang, Y. C. Lee, and Gloria Lin, Insole structure with heel cup, ROC Patent No. M391317 2010.

  8. C. M. Lu, and M. J. Wang, Automated landmarks extraction from three dimensional whole body scanned data, US Patent No.7561726, 2009.

Click here to download all the publications (before 2009).

TOP

Click Num:
Login Success