test1029
A. Refereed Journal Papers
1、 Wu, P.H. and Chu, C.H.* (2012) “Improved Curve Morphing Based on Discrete Dynamic Programming,” accepted (2012/6), International Journal of Innovative Computing Information and Control. (SCI)
2、 Luh, Y.P., Wang, J.B., Chang, J.W., Chang, Y.Y., Chu, C.H.* (2012) “Augmented Reality based Mass Customization of Shoe Design,” accepted (2012/4), Journal of Intelligent Manufacturing. (SCI)
3、 Smith, S.*, Jiao, J., and Chu, C.H. (2012) “Mass Customization in the Product Life Cycle,” accepted (by invitation), Journal of Intelligent Manufacturing. (SCI)
4、 Hsieh, S.T. and Chu, C.H.* (2012) “Improving Tool Path Planning in 5-Axis Flank Milling of Ruled Surfaces using Advanced PSO Algorithms,” in press (2012/5), Robotics & Computer Integrated Manufacturing. (SCI)
5、 Hsieh, S.T., Tsai, Y.C., and Chu, C.H.* (2012) “Multi-Pass Progressive Tool Path Planning in Five-Axis Flank Milling by Particle Swarm Optimization,” in press (2012/3), International Journal of Computer Integrated Manufacturing. (SCI)
6、 Lo, C.H. and Chu, C.H.* (2011) “An Investigation of the Social-Affective Effects Invoked by Appearance-Related Products,” in press (since 2011/9), Human Factors and Ergonomics in Manufacturing & Service Industries. (SCI)
7、 Lin, Y.I., Chou, Y.W., Shiau, J.Y., and Chu, C.H.* (2011) “Multi-Agent Negotiation based on Price Schedules Algorithm for Distributed Collaborative Design,” accepted (2011/7), Journal of Intelligent Manufacturing. (SCI)
8、 Su, C.P., Chu, C.H.*, Li, W.D., and Jiao, J. (2011) “Design Chain Management: Bridging the Gap,” to appear, Journal of Intelligent Manufacturing. (SCI)
9、 Chan, Y.H., Wu, P.H., and Chu, C.H.* (2012) “Optimized Product Data Transmission in LOD-based Collaborative Design using P2P CAD Streaming,” Vol. 23, No. 5, pp.1559-1571, Journal of Intelligent Manufacturing. (SCI)
10、Chu, C.H.* and Hsieh, S.T. (2012) “Generation of Reciprocating Tool Motion in 5-Axis Flank Milling based on PSO,” Vol. 23, No. 5, pp. 1501–1509, Journal of Intelligent Manufacturing. (SCI)
11、Chu, C.H.*, Su, C.P., and Chen, Y.T. (2012) “A Concurrent Approach to Reducing Environmental Impact of Product Development in the System Design Stage,” Vol. 9, No. 3, pp. 482-495, IEEE Transactions on Automation Science and Engineering. (SCI)
J12. Lin, Y.I., Tien, K.W., and Chu, C.H.* (2012) “Multi-Agent Negotiation based on Multi-Resource Price Schedules Decomposition for Distributed Design,” Vol. 63, No. 6, pp. 597-609, Computers in Industry. (SCI)
J13. Su, C.P.* and Chu, C.H. (2012) “A Decision Support System to Estimate the Carbon Emission and Cost of Product Designs,” Vol. 13, No. 7, pp. 1037-1045, International Journal of Precision Engineering and Manufacturing. (SCI)
J14. Chiu, M.C. and Chu, C.H.* (2012) “A Review on Integrated Sustainable Product Design from Life Cycle Perspectives,” Vol. 13, No. 7, pp. 1-14, International Journal of Precision Engineering and Manufacturing. (SCI)
J15. Chu, C.H.*, Huang, W.N., and Li, Y.W. (2012) “An integrated framework of Tool Path Planning in 5-Axis Machining of Centrifugal Impeller with Split Blades,” Vol. 23, pp. 687-698, Journal of Intelligent Manufacturing. (SCI)
J16. Chu, C.H.*, Wu, P.H., and Lei, W.T. (2012) “Tool Path Planning for 5-Axis Flank Milling of Ruled Surfaces Considering CNC Linear Interpolation,” Vol. 23, pp. 471-480, Journal of Intelligent Manufacturing. (SCI)
J17. Wu, P.H., Hsieh, S.T., and Chu, C.H.* (2012) “Reducing Machining Error in 5-Axis Flank Milling with Simultaneous Perturbation Stochastic Approximation Method,” Vol. 8, No. 5, pp. 1-11, International Journal of Innovative Computing Information and Control. (SCI)
J18. Huang, S.H., Yang, Y.I., and Chu, C.H.* (2012) “Human-Centric Design Personalization of 3D Glasses Frame in Markerless Augmented Reality,” Vol. 16, pp. 35-45, Advanced Engineering Informatics. (SCI)
J19. Hsieh, S.T. and Chu, C.H.* (2012) “Reducing Machining Error in 5-Axis Flank Milling of Ruled Surfaces with Improved PSO,” Vol. 13, No. 1, pp. 1-8, International Journal of Precision Engineering and Manufacturing. (SCI)
J20. Hsieh, S.T and Chu, C.H.* (2011) “PSO-based Tool Path Planning for 5-Axis Flank Milling Accelerated by GPU,” Vol. 24, No. 7, pp. 676-687, International Journal of Computer Integrated Manufacturing. (SCI)
J21. Luh, Y.P., Pan, C.C., and Chu, C.H.* (2011) “Deployment of Distributed PLM System in Collaborative Product Development,” Vol. 24, No. 5, pp. 471-483, International Journal of Computer Integrated Manufacturing. (SCI)
J22. Cheng, H.C., Lo, C.H., Chu, C.H.*, and Kim, Y.S. (2011) “Similarity Assessment based on Integration of D2 Shape Distribution and Negative Feature Decomposition for 3D Mechanical Parts,”, Computers in Industry, Vol. 62, pp. 269–280. (SCI)
J23. Chu, C.H.*, Wang, C.C.L., Tsai, C.R., and Li, Y.W., (2011) “Strip Approximation with Bézier Patches in Conical Form for Design and Manufacturing of Developable Materials,” Vol. 24, No. 3, pp. 269–284, International Journal of Computer Integrated Manufacturing. (SCI)
J24. Chu, C.H.*, Tien, K.W., Lee, C.T., and Ting, C.J. (2011) “Efficient Tool Path Planning in 5-Axis Milling of Ruled Surfaces using Ant Colony System Algorithms,” Vol. 49, No. 6, pp. 1557–1574, International Journal of Production Research. (SCI)
J25. Lo, C.H., Tseng, K.C., and Chu, C.H.* (2010) “One Step QFD Based 3D Morphological Charts for Concept Generation of Product Variant Design,” Vol. 37, pp. 7351-7363, Expert System with Applications. (SCI)
J26. Wang, C.C.L.* and Chu, C.H. (2010) “Soft Products Development,” Computers in Industry, Vol. 61, pp. 511–512. (SCI)
J27. Lo, C.H.*, Chu, C.H., Debattista, K., and Chalmers, A. (2010) “An Investigation of Efficient Rendering of Ray Traced Stereoscopic Images,” The Visual Computer, Vol. 26, pp. 97-107. (SCI)
J28. Chu, C.H., Tsai, Y.T., Wang, C.C.L.*, and Kwok, T.H. (2010) “Exemplar-Based Statistical Model for Semantic Parametric Design of Human Body,” Computers in Industry, Vol. 61, No. 5, pp. 541-549. (SCI)
J29. Luh, Y.P., Chu, C.H.*, and Pan, C.C. (2010) “Management of Green Product Design using Generic Modularized Product Architecture in PDM,” Computers in Industry, Vol. 61, pp. 223-234. (SCI)
J30. Cheng, H.C. and Chu, C.H.* (2010) “3D Similar Part Search through CAD/PDM Integration,” Journal of Advanced Engineering, Vol. 5, No. 1, pp. 15-20.
J31. Chu, C.H.*, Wu, P.H., and Yuan, G.X. (2009) “Online Parametric Configuration of 3D Product based on Triangulation Model,” Vol. 223, No. 3, pp. 231-246, Journal of Engineering Manufacture. (SCI)
J32. Chu, C.H.*, Wu, P.H., Hsu, Y.C., and Sung, M.C., (2009) “Multi-Agent Collaborative 3D Design with Multiple Levels of Detail,” Robotics & CIM, Vol. 25, pp. 334-347. (SCI)
J33. Tsai, W.L., Lo, C.H., and Chu, C.H.* (2009) “Designing Developable Surface with Haptic Force Feedback,” Journal of Engineering Manufacture, Vol. 223, No. 2, pp. 163-168. (SCI)
J34. Lo, C.H. and Chu, C.H.* (2009) “Experimental Study for Computer Aided Affective Product Styling,” Vol. 6, No. 4, pp. 471-482, Computer-Aided Design and Applications. (EI)
J35. Chu, C.H.*, Cheng, H.C., Wang, E., and Kim, Y.S., (2009) “ANN-based 3D Part Search with Different LOD in Negative Feature Decomposition,” Vol. 36, pp. 10905-10913, Expert Systems with Applications. (SCI)
J36. Chu, C.H.*, Luh, Y.P., Li, T.C, and Chen, H. (2009) “Economical Green Product Design based on Computer-Aided Product Structure Variation”, Vol. 60, No. 7, pp. 485-500, Computers in Industry. (SCI)
J37. Lo, C.H. and Chu, C.H.* (2009) “Affective Modelling: Profiling Geometrical Models with Human Emotional Responses,” Vol. 28, No. 7, pp. 1811-1820, Computer Graphics Forum. (SCI)
J38. Chu, C.H.*, Wang, C.C.L., and Tsai, C.R., (2008), “Computer Aided Geometric Design of Strip using Developable Bézier Patches,” Computers in Industry, Vol. 59, pp. 601-610. (SCI)
J39. Chu, C.H., Huang, W.N., and Hsu, Y.Y.* (2008) “Machining Accuracy Control in Five-Axis Flank Milling of Ruled Surface,” International Journal of Machine Tools and Manufacture, Vol. 48, pp. 914-921. (SCI)
J40. Wu, P.H. and Chu, C.H.* (2008) “Optimized Tool Path Generation in 5-Axis Flank Milling using Dynamic Programming,” International Journal of Machine Tools and Manufacture, Vol. 48, pp. 914-921. (SCI)
J41. Tsai, W.L., Wang, C.C.L.*, Chu, C.H., and Tang, K. (2008) “Optimal Quadrangulation for Flank Milling of Strip,” Computer-Aided Design and Applications, Vol. 5, No. 1-4, pp. 307-315. (EI)
J42. Wu, P.H., Li, Y.W., and Chu, C.H.* (2008) “Tool Path Planning for 5-Axis Flank Milling Based on Dynamic Programming Techniques,” Lecture Notes in Computer Science, Vol. 4975, pp. 570-577. (EI)
J43. Chu, C.H.*, Chan, Y.H., and Wu, P.H. (2008) “3D Streaming based on Multi-LOD Models for Networked Collaborative Design,” Computers in Industry, Vol. 59, pp. 863-872. (SCI)
J44. Chu, C.H.*, Wang, C.C.L., and Tsai, C.R., (2007) “Strip Approximation Using Developable Bézier Patches,” Computer-Aided Design and Applications, Vol. 4, No. 6, pp. 807-816. (EI)
J45. Chu, C.H.* and Chen, J.T. (2007) “Characterizing Design DOF for Composite Developable Bézier Surfaces and Their Applications in Design and Manufacturing,” Robotics & CIM, Vol. 23, No. 1, 116-125. (SCI)
J46. Cheng, H.C., Chu, C.H.*, Wang, E., and Kim, Y.S. (2007) “3D Part Similarity Comparison based on Levels of Detail in Negative Feature Decomposition Using Artificial Neural Network,” Computer-Aided Design and Applications, Vol. 4, No. 5, pp. 619-628. (EI)
J47. Chu, C.H.*, Song, M.C., and Luo, V.C. (2006), “Computer Aided Parametric Design for 3D Tire Mold Production,” Computers in Industry, Vol. 57, No. 1, pp. 11-25. (SCI)
J48. Chu, C.H.* and Hsu, Y.C. (2006), “Similarity Assessment of 3D Mechanical Components for Design Reuse,” Robotics & CIM, Vol. 22, No. 4, pp. 332-341. (SCI)
J49. Chu, C.H.*, Wu, P.H., and Hsu, Y.C., (2006) “Collaborative 3D Product Development with Multiple LOD in Visualization of Design Features,” Computer-Aided Design and Applications, Vol. 3, No. 6, pp. 789-802. (EI)
J50. Chu, C.H.*, Chang, C.J., and Cheng, H.C. (2006), “Empirical Studies on Inter-Organizational Collaborative Product Development,” ASME Journal of Computing & Information Science in Engineering, Vol. 6, No. 2, pp. 179-187. (SCI)
J51. Chu, C.H.* and Chen, J.T. (2006), “Automatic Tool Path Generation for 5-axis Flank Milling based on Developable Surface Approximation,” International Journal of Advanced Manufacturing Technology, Vol. 29, No. 7-8, pp. 707-713. (SCI)
J52. Chu, C.H.*, Cheng, C.Y., and Wu, C.W. (2006), “Applications of the Web-Based Collaborative Visualization in Distributed Product Development”, Computers in Industry, Vol. 57, No. 3, pp. 272-282. (SCI)
J53. Kuo, C.F. and Chu, C.H.* (2005), “An Online Ergonomic Evaluator for Product Design using 3D Visualization Technology”, Computers in Industry, Vol. 56, No. 5, pp. 479-492. (SCI)
J54. Chu, C.H.* and Chen, J.T. (2005), “Geometric Approach to Optimising Edge Quality in Planar Milling,” International Journal of Production Research, Vol. 43, pp. 773–791. (SCI)
J55. Chu, C.H.* and Hsu Y.C. (2005), “An Integrated Approach for 3D Part Search with Multiple Shape Signatures,” Computer Aided Design and Applications, Vol. 2, No. 1-4, pp. 183-192. (EI)
J56. Chu, C.H.*, Lin, C., Li, Y.W., and Yang, J.Y. (2005), “Online Product Configuration in E-Commerce with 3D Web Viewing Technology,” International Journal of Electronic Business Management, Vol. 3, No. 3, pp. 225-234. (EI)
J57. Chu, C.H.* and Cheng, H.C., (2005) “Business Model Innovation based on Collaborative Product Development: A Case Study of Taiwan Design Services,” Vol. 3, No. 4, pp. 257-269, International Journal of Electronic Business Management. (EI)
J58. Chu, C.H.* (2005), “Tool Path Planning for Edge Quality Enhancement in Planar Milling of Free Form Contours,” Journal of Material Science Forum, Vol. 505-507, pp. 583-588. (SCI)
J59. Chu, C.H.* and Dornfeld, D.A. (2005), “Reducing Burr Formation in Planar Milling by Avoiding Tool Exits," Journal of Manufacturing Processes, Vol. 7, No. 2, pp. 182-195. (SCI)
J60. Chu, C.H.* and Chen, J.T. (2004), “Geometric Design of Developable Composite Bézier Surfaces,” Computer Aided Design and Applications, Vol. 1, No. 3, pp. 531-540. (EI)
J61. Chang, J.R. and Chu, C.H.* (2004), “Collaborative Product Development in PCB Industry,” International Journal of Electronic Business Management, Vol. 2, No. 2, pp. 108-116. (EI)
J62. Chu, C.H.* and Dornfeld, D.A. (2004), “Linking Tool Paths Generated with Different Offset Distances for Edge Quality Enhancement,” Journal of Engineering Manufacture, Vol. 128, pp. 721-730. (SCI)
J63. Chu, C.H.* and Chen, J.T. (2004), “Developable Bézier Surface Design with Continuities,” Journal of Computers, Vol. 16, No. 2, pp. 9-15.
J64. Chu, C.H.* and Séquin, C.H. (2002), “Developable Bézier Patches: Properties and Design,” Computer Aided Design, Vol. 34, No. 7, pp. 511-527. (SCI)
J65. Wright, P.K.*, Dornfeld, D.A., Wang, F.C., and Chu, C.H. (2000), “Multiple-Criterion Decision Making in an Agent-Based Process Planning System,” Transactions of NAMRI/SME, Vol. XXVIII, pp. 293-298. (EI)
J66. Chu, C.H.* and Dornfeld, D.A. (2000), “Tool Path Planning for Avoiding Exit Burr,” Journal of Manufacturing Processes, Vol. 2, No. 2, pp. 116-123. (SCI)
J67. Dornfeld, D.A.*, Wright, P.K., Wang, F.C., Sheng, P.S., Stori, J.A., Sundararajan, V., Krishnan, N., and Chu, C.H. (1999), “Multi-Agent Process Planning for a Networked Machining Service,” Transactions of NAMRI/SME, Vol. XXVII, pp. 191-196. (EI)
J68. You, C.F.* and Chu, C.H. (1997), “Tool Path Verification in Five-Axis Machining of Sculptured Surfaces,” International Journal of Advanced Manufacturing Technology, Vol. 13, No. 4, pp. 248-255. (SCI)
J69. You, C.F.* and Chu, C.H. (1996), “Automatic Correction of Tool Interference in Five-Axis NC Machining of Multiple Surfaces,” Journal of the Chinese Society of Mechanical Engineers, Vol. 17, pp. 435-442. (SCI)
J70. You, C.F.* and Chu, C.H. (1995), “An Automatic Path Generation Method of NC Rough Cut Machining from Solid Models,” Computers in Industry, Vol. 26, pp. 161-173. (SCI)
Submitted or Under Review
J71. Lo, C.H., Cheng, H.C., and Chu, C.H.* (2011) “Cognitive-Based Shape Similarity Assessment for 3D Mechanical Parts Retrieval,” 1st revision, IEEE Transactions on Automation Science and Engineering. (SCI)
J72. Huang, S.H., Yang, C.K., Tseng, C.Y., and Chu, C.H.* (2012) “Design Customization of Respiratory Mask based on 3D Face Anthropometric Data,” 1st revision, International Journal of Industrial Ergonomics. (SCI)
J73. Lin, Y.I., Tien, K.W., and Chu, C.H.* (2012) “A Multi-Target Hierarchical Negotiation Mechanism for Distributed Design,” submitted, IEEE Transactions on Automation Science and Engineering. (SCI)
J74. Chu, C.H.* and Hsu, C.H. (2012) “Precise 5-Axis Grooving of Tire Mold based on Surface Re-parameterization,” under review, International Journal of Precision Engineering and Manufacturing.
J75. Lin, C.W., Lin, Y.K., and Chu, C.H.* (2012) “Dynamic Models and Design of Spindle-Bearing Systems of Machine Tools: A Review,” under review, International Journal of Precision Engineering and Manufacturing.
J76. Kuo, T.C.* and Chu, C.H. (2012) “Risk Management of Hazardous Substances in the Green Supply Chain,” under review, International Journal of Precision Engineering and Manufacturing.
B. Conference Papers
C1. Lo, C.H., Huang, S.H., and Chu, C.H. (2012) “An Integrated Kansei-Based Experiment Scheme for Evaluating Appearance-Related Product Prototypes,” International Conference on Innovative Design and Manufacturing, Taipei, Taiwan.
C2. Yang, C.K., Yang, Y.I., and Chu, C.H. (2012) “3D Virtual Shoe Try-On Driven by Depth Sensing Technologies,” International Conference on Innovative Design and Manufacturing, Taipei, Taiwan.
C3. Hsu, C.H. and Chu, C.H. (2012) “Tool Path Generation based on Surface Re-Parameterization in 5-Axis Grooving of Tire Molds,” International Conference on Innovative Design and Manufacturing, Taipei, Taiwan.
C4. Yang, Y.I. and Chu, C.H. (2012) “Virtual Try-on of Footwear in Mixed Reality,” Design Engineering Workshop, Seoul, Korea.
C5. Lin, Y.I, Tien, K.W. and Chu, C.H. (2012) “Agent-based Hierarchical Negotiation in Distributed Design,” Design Engineering Workshop, Seoul, Korea.
C6. Su, J.C.P. and Chu, C.H. (2012) “A Framework to Integrate Product Design and Supply Chain Decisions to Minimize CO2 Emission,” CIRP Life Cycle Engineering 2012, Berkeley, USA.
C7. Huang, S.H., Yang, Y.I., and Chu, C.H. (2011) “Mixed reality based distributed product assembly,” International Symposium of Digital Manufacturing, Yamaguchi, Japan.
C8. Hsieh, S.T., Tsai, Y.C., and Chu, C.H. (2011) “Multi-Pass Progressive Tool Path Planning in 5-Axis Flank Milling by PSO Algorithms,” IIE Asia, Shanghai, China.
C9. Hsieh, S.T. and Chu, C.H. (2011) “Optimization of Tool Path Planning in 5-Axis Flank Milling of Ruled Surfaces with Improved PSO,” FAIM 2011, Taichung, Taiwan.
C10. Chu, C.H., Su, C.P., and Chen, Y.T. (2011) “An Integrated Approach to Sustainable Product Development at the System Design Stage,” CIRP Design Seminar, Daejeon, Korea.
C11. Huang, S.H., Yang, Y.I., Cheng, H., Cheng, K.C., Chu, C.H. (2010) “Design Customization of 3D Glasses Frame based on Augmented Reality Technologies,” Mass Customization and Personalization 2010, Taipei, Taiwan.
C12. Hsieh, H.T. and Chu, C.H. (2010) “GPU-Based Optimization of Tool Path Planning in 5-Axis Flank Milling,” International Conference on Manufacturing Automation, Hong Kong.
C13. Chu, C.H., Wu, P.H., and Hsieh, H.T. (2010) “Reducing Machining Error in 5-Axis Flank Milling using Simultaneous Perturbation Stochastic Approximation,” International Symposium on Flexible Automation, Tokyo, Japan.
C14. Tsai, Y.T., Chu, C.H., and Wang, C.C.L (2010) “Parametric Modelling of the Human Body Shape by Statistical Model,” TMCE 2010, Ancona, Italy.
C15. Chou, Y.W., Lin, Y.I., Yang, C.C, and Chu, C.H. (2010) “Distributed Edge Precision Planning in Micromilling,” The 18th Automation Conference, Taoyuan, Taiwan. (in Chinese)
C16. Tsai, Y.T., Chu, C.H., and Wang, C.C.L (2010) “Parametric 3D Human Modelling by Linear Statistical Model,” The 17th Annual Conference on Ergonomics, Taipei, Taiwan.
C17. Tseng, K.C. and Chu, C.H. (2009) “A Novel Systematic Approach for Product Variant Design using One-Step Quality Function Deployment,” IEEE CAD/Graphics, Yellow Mountain City, China.
C18. Chou, Y.W., Lin, Y.I., and Chu, C.H. (2009) “Distributed Design Negotiation using Intelligent Multi-Agent Technologies,” Annual Conference on Defence Technologies, Taoyuan, Taiwan. (in Chinese)
C19. Cheng, H.C. and Chu, C.H. (2009) “3D Similar Part Search with Multiple Levels of Detail,” Annual Conference of the Society of Chinese Industrial Engineering, Taichung, Taiwan. (in Chinese)
C20. Luh, Y.P., Pan, C.C., and Chu, C.H. (2009) “Deployment Methodology of Distributed PLM Platform Architecture,” Digital Enterprise Technologies 2009, Hong Kong.
C21. Chu, C.H. and Luh, Y.P. (2009) “Computer-Aided Green Product Design Based on Product Structure Variation,” Digital Enterprise Technologies 2009, Hong Kong.
C22. Chu, C.H., Lee, C.T., Tien, K.W., and Hsieh, H.T. (2009) “Machining Error Reduction in 5-Axis Flank Milling of Ruled Surfaces using Ant Colony System Algorithms,” ISDM 2009, Wuhan, China.
C23. Chu, C.H. and T.C. Li (2009) “Collaborative Product Development Education,” ASME Asia Pacific Engineering Education Congress 2009, Taipei, Taiwan.
C24. Luh, Y. P., Chu, C.H., and Pan, C.C. (2008) “Management of Product Data Compliant with Various Green Directives using Modularized Product Architecture,” International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Beijing, China.
C25. Cheng, H.C. and Chu, C.H. (2008) “Similarity Comparison of 3D Models by Integrating NFD and D2,”Annual Conference of the Society of Chinese Industrial Engineering, Taoyuan, Taiwan. (in Chinese)
C26. Li, C.T, Tien, K.W., and Chu, C.H. (2008) “Tool Path Planning in 5-Axis Flank Milling using Ant Colony Algorithms,” Annual Conference of the Society of Chinese Industrial Engineering, Taoyuan, Taiwan. (in Chinese)
C27. Cheng, H.C. and Chu, C.H. (2008) “Analysis of PDM Functional Requirements for Taiwan Industries,” Conference of Enterprise Operations Management, Taoyuan, Taiwan. (in Chinese)
C28. Chan, Y.H., Wu, P.H., and Chu, C.H. (2008) “3D CAD Streaming for Collaborative Design,” Annual Conference of Electronic Business Management Society, Tainan, Taiwan.
C29. Cheng, H.C. and Chu, C.H. (2008) “3D Part Search for Design Knowledge Reuse,” Annual Conference of Electronic Business Management Society, Tainan, Taiwan.
C30. Luh, Y. P., Pan, C. C., and Chu, C.H. (2008) “Automatic Mold Material Processing Based on Geometry Linking Technology and Assembly Revision Control Mechanism,” Asia Pacific Conference on Material Processing, Guilin, China.
C31. Chu, C.H., Huang, W.N., and Luh, Y.P. (2008) “Tool Path Planning Framework for Five-Axis Machining of Centrifugal Impeller with Split Blades,” Asia Pacific Conference on Material Processing, Guilin, China.
C32. Chan, Y.H. and Chu, C.H. (2008) “Product Model Distribution in Networked Design Collaboration Based on P2P 3D Streaming,” CSCWD 2007, Xian, China.
C33. Chu, C.H. and Wu, C.C., (2007) “Selection of Rough Cut Strategy in Free-Form Cavity Machining,” The Ninth International Conference on Automation Technology, Taipei, Taiwan.
C34. Chan, Y.H. and Chu, C.H. (2007) “Optimization of Peer-to-Peer 3D Streaming in Networked Collaborative Design,” Annual Conference of Electronic Business Management Society, Taipei, Taiwan.
C35. Cheng, H.C., Chu, C.H., Wang, E., and Kim, Y.S. (2007) “3D Similar Part Search by an Approach Integrating Shape Statistics and Feature Recognition,” Annual Conference of Chinese Society of Mechanical Engineers, Taoyuan, Taiwan.
C36. Cheng, H.C. and Chu, C.H. (2007) “Business Model Innovation through Collaborative Product Development: A Case Study of Design Services in Taiwan,” IEEE International Conference on Industrial Engineering and Engineering Management, Singapore.
C37. Chu, C.H., Huang, W.N., and Li, Y.W. (2007) “An Integrated Framework of Tool Path Planning for Multi-Axis Machining of Centrifugal Impeller with Split Blades,” International Conference on Manufacturing Automation, Singapore.
C38. Luh, Y.P., Chu, C.H. and Pan, C.C. (2007) “Economical Green Design by Product Architecture with Product Data Management Technologies,” International Conference on Manufacturing Automation, Singapore.
C39. Chan, Y.H., Wu, P.H., and Chu, C.H. (2007) “Mesh-Based 3D CAD Streaming in Collaborative Design,” APIEMS 2007, Kaohsiung, Taiwan.
C40. Lin, C.W., Chu, C.H., and Chang, C.J. (2006) “Empirical Studies on Collaborative Product Development: Classifications, Operating Mechanisms, and Implementing Strategies,” Computers and Industrial Engineering Conference, Taipei, Taiwan.
C41. Huang, Y.F. and Chu, C.H. (2006) “Automatic Design Change Propagation in Collaborative Product Development,” Computers and Industrial Engineering Conference, Taipei, Taiwan.
C42. Chan, Y.H and Chu, C.H. (2006) “3D CAD Streaming with Multiple Levels of Detail,” International Design Research Symposium, Seoul, Korea.
C43. Chu, C.H., Yuan, G.X., Cheng, C.Y., and Wu, C.W. (2006) “Web-Based 3D Visualization for Collaborative Product Development,” ASME IDETC/CIE, Philadelphia, USA.
C44. Chu, C.H., Hsu, Y.C., and Wu, P.H. (2006) “A Multi-Agent System for Collaborative 3D Product Design with Levels of Detail,” International Symposium on Flexible Automation, Osaka, Japan.
C45. Li, T.C, and Chu, C.H. (2005) “Optimization of Product Architecture for Supply Chain Design,” Annual Conference of Chinese Society of Industrial Engineers, Hsinchu, Taiwan. (in Chinese)
C46. Chen, Y.C., Huang, U.F., Sung, M.C., and Chu, C.H. (2005) “Automatic Propagation of Design Change in Collaborative Design,” Annual Conference of Chinese Society of Industrial Engineers, Hsinchu, Taiwan. (in Chinese)
C47. Hsu, Y.C., Wu, P.H., Sung, M.C., and Chu, C.H. (2005) “Agent-based Collaborative Design with Multiple Levels of Detail,” Annual Conference of Chinese Society of Industrial Engineers, Hsinchu, Taiwan. (in Chinese)
C48. Chu, C.H. and Cheng, H.C. (2005), “Business Model Innovation based on Collaborative Product Development: A Case Study of Taiwan Design Services,” Annual Conference of Electronic Business Management Society, Taipei, Taiwan.
C49. Chu, C.H. and Chen, J.T. (2005), “Five-Axis Flank Machining of Ruled Surfaces with Developable Surface Approximation,” CAD & Graphics 2005, Hong Kong, pp. 238-246.
C50. Chu, C.H., Chang, C.J., and Li, T.C. (2005) “Analysis of Different Business Practices of Collaborative Product Development in Taiwan,” ITRI Innovation and Technology Management Conference, Hsinchu, Taiwan. (in Chinese)
C51. Cheng, H.C. and Chu, C.H. (2005) “Collaborative Design in Taiwan Mold Industry,” Mold Technology Conference, Taipei, Taiwan.
C52. Chu, C.H., Chang, C.J., and Cheng, H.C. (2005), “Collaborative Product Development and Design: Empirical Studies in Asia Pacific Region,” APIEMS 2005, Manila, Philippines.
C53. Chu, C.H., Li, Y.W., and Yang, J.Y. (2005), “Product Configuration in E-Commerce using 3D Web-Based Collaborative Visualization,” APIEMS 2005, Manila, Philippines.
C54. Wu, P.H. and Chu, C.H. (2004), “Multi-Level 3D Modelling for Synchronous Collaborative Design,” Annual Conference of Chinese Society of Industrial Engineers, Tainan, Taiwan.
C55. Hsu, Y.C. and Chu, C.H. (2004) “3D Part Search in Distributed Collaborative Design,” Annual Conference of Chinese Society of Industrial Engineers, Tainan, Taiwan. (in Chinese)
C56. Chen, J.T. and Chu, C.H. (2004), “Avoidance of Local Tool Interference in Five-Axis Flank Milling,” Twenty First National Conference of the Chinese Society of Mechanical Engineering, Kaohsiung, Taiwan.
C57. Chu, C.H. and Chen, J.T. (2004), “Geometric Design of Uniform Developable B-Spline Surfaces,” ASME 30th Design Automation Conference, Salt Lake City, Utah.
C58. Chang, C.J. and Chu, C.H. (2004), “Collaborative Product Development in PCB Industry,” Annual Conference of Electronic Business Management Society, Taipei, Taiwan.
C59. Hsu, Y.C. and Chu, C.H. (2004), “Engineering Change Management for Similarity Products,” Automation 2004, Taipei, Taiwan.
C60. Chen, J.T. and Chu, C.H. (2003), “Geometric Design of Developable B-Spline Patches,” Twentieth National Conference of the Chinese Society of Mechanical Engineering, Taipei, Taiwan.
C61. Chu, C.H. and Chen, J.T. (2003), “Developable Bézier Surface Design with Continuities,” Computer Graphics Workshop, Session 3, No. 1, Hualien, Taiwan.
C62. Chu, C.H. (2002), “Counting Degrees of Freedom for Developable Bézier Surfaces,” ASME 28th Design Automation Conference, DAC02-024, Montréal, Canada.
C63. Chu, C.H., Dornfeld, D.A., and Brenuum, C. (2000), “Burr Prediction and Simulation for Edge-Precision Process Planning,” 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Montréal, Canada.
C64. Rangarajan, A., Chu, C.H., and Dornfeld, D.A. (2000), “Avoiding Tool Exit in Planar Milling by Adjusting Widths of Cut,” Proceedings of the ASME Manufacturing Engineering Division, Vol. 11, pp.1017-1027.
C65. Dornfeld, D.A., Min, S., Kim, J., Hewson, J., Chu, C.H., Tyler, P., Ffield, P., and Absari, A. (1999), “Burr Prevention and Minimization for the Aerospace Industry,” SAE Aerospace Manufacturing Technology Conference, pp. 1-6.
C66. Chu, C.H., Chang H.J., and Lin, C.K. (1996), “Avoidance of Tool Interference in Five-Axis Milling,” Proc. of the Fourth International Conference on Automation Technology, Hsinchu, Taiwan, Vol. 1, pp. 339-346.
C67. You, C.F. and Chu, C.H. (1995), “A Systematic Approach to Correct Tool Interference in Five-Axis Milling,” Proc. of the Twelfth National Conference of the Chinese Society of Mechanical Engineering, Chia-Yi, Taiwan, Vol. 2, pp. 655-664.
C68. Chu, C.H. and You, C.F. (1995), “A Method for Interference Detection of NC Tool Path in Five-Axis Machining of Sculptured Surfaces,” Proc. of the Eighth National Conference of Automation in Industry, Chungli, Taiwan, Vol. 1, pp. 220-227.
C69. You, C.F. and Chu, C.H. (1992), “NC Rough Cut Machining from Solid Models,” Proc. of the Second International Conference on Automation Technology, Taipei, Taiwan, Vol. 2, pp. 75-82.
C. Book Chapters
P1. Chu, C.H. and Dornfeld, D.A., (2000) Chapter 4: Prediction and Simulation of Milling Burr Formation for Edge-Precision Process Planning, Integrated Design and Manufacturing in Mechanical Engineering, Chedmail, P.; Cognet, G.; Fortin, C.; Mascle, C.; Pegna, J. (Eds.), Kluwer Academic Publishers.
P2. 陳銘崑，吳忠敏，瞿志行，LCD產業協同設計個案，製商整合e化個案集，教育部顧問室，2004。
P3. 林則孟，瞿志行，蔡明標，紡織業協同設計個案，製商整合e化個案集，教育部顧問室，民2005。
D. Patents
P1. 「基於產品多層次概念之三維CAD串流傳輸技術」，美國專利 (2007)，瞿志行、詹于萱、吳秉函、宋牧奇。（申覆中）
P2. 「五軸側銑之往覆式路徑規劃技術」，中華民國、美國專利 (2010)，瞿志行、謝欣達。（審查中）
P3. 「一種五軸曲面側銑加工系統及其刀具路徑規劃方法」，中華民國專利 (2011)，瞿志行、吳秉函、劉奕志。（審查中）
P4. 「輪胎模具切削之加工方法」，中華民國專利（編號I330773，瞿志行、劉湘怡）
P5. 「輪胎模具五軸銑削之加工區域最佳化分解技術」中華民國專利（編號200925812，瞿志行、吳秉函、劉奕志）